finer mesh in a specific zone of the model

amarjogot · August 7, 2013, 13:09

Hello every one, i think every one is doing fine. I am having some problem with my model. In my model (attached file), I want to have finer mesh in the red zone (throughout the whole cylinder inside upto base). How can i do that. I am new in this software and thanks in advance for your assistance.

Zoheb

siara817 · August 8, 2013, 02:42

Go to tools and right click on volume shapes. select cylinder.
generate a cylinder the place you want.
go to Continua/mesh and right click on volumetric controls and click new.
select the shape you made and determined the size of mesh that you want.

amarjogot · August 9, 2013, 13:26

Thank you very much Siamak. It really works for me....

rwryne · August 9, 2013, 15:20

You can also do this by making a cylinder Part and doing the same steps as he described.

I have a feeling volume shapes will be dropped sometime in the future as they duplicate the features of parts. Seems like everything geometry wise is being pushed to parts (i.e. parts based meshing...)

August 8, 2013, 02:42		#2
siara817 Senior Member siamak rahimi ardkapan Join Date: Jul 2010 Location: Copenhagen, Denmark Posts: 220 Rep Power: 17	Go to tools and right click on volume shapes. select cylinder. generate a cylinder the place you want. go to Continua/mesh and right click on volumetric controls and click new. select the shape you made and determined the size of mesh that you want. __________________ Good luck Siamak

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit problems	Althea	FLUENT	22	January 4, 2017 03:19
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
Cht tutorial in 15	braennstroem	OpenFOAM Running, Solving & CFD	197	June 10, 2015 03:02
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem	Attesz	OpenFOAM Meshing & Mesh Conversion	12	May 2, 2013 10:52
Frozen Rotor 1:1 Mesh Connection	pharley	CFX	5	January 31, 2013 16:15

August 9, 2013, 13:26		#3
amarjogot New Member shoumo Join Date: Jun 2013 Posts: 16 Rep Power: 12	Thank you very much Siamak. It really works for me....

August 9, 2013, 15:20		#4
rwryne Senior Member Ryne Whitehill Join Date: Aug 2009 Posts: 312 Rep Power: 18	You can also do this by making a cylinder Part and doing the same steps as he described. I have a feeling volume shapes will be dropped sometime in the future as they duplicate the features of parts. Seems like everything geometry wise is being pushed to parts (i.e. parts based meshing...)