|August 30, 2013, 10:38||
Specifying constant temperature condition to a region
Join Date: Dec 2010
Posts: 9Rep Power: 7
Is it possible to assign a constant temperature condition to a region.
Not for the boundary but for a region itself.
Region should be maintained at a specified temperature always.
Initializing the region would not keep it constantly at a value.
For using energy source option, I dont know the volumetric heat generation rate.
I heard it is possible in Fluent and it should be possible in Star-CCM+.
Please let me know.
|September 19, 2013, 06:04||
Join Date: Mar 2009
Posts: 57Rep Power: 9
Yes, it is possible. It is documented in the UserGuide of CCM+. Look for "prescribing constant temperatures in fluid cells" starting from version 5.04.
In the example they use a cell set. This is not necessary if you want the fixed temperature for a complete region.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Boundary Condition for granular temperature Theta||cheng1988sjtu||OpenFOAM Programming & Development||4||July 4, 2016 16:08|
|whats the cause of error?||immortality||OpenFOAM Running, Solving & CFD||11||April 22, 2014 12:32|
|Using starToFoam||clo||OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...||33||September 26, 2012 04:04|
|boundary condition and differenet constant properties for for two different region.||alvora||OpenFOAM||2||January 25, 2011 05:08|
|StarToFoam error||Kart||OpenFOAM Meshing & Mesh Conversion||1||February 4, 2010 05:38|