CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Compressing mesh in CCM+ (http://www.cfd-online.com/Forums/star-ccm/124966-compressing-mesh-ccm.html)

crevoise October 16, 2013 08:22

Compressing mesh in CCM+
 
Hello

Does anyone knows a way to compress the mesh in CCM+, as it was possible in StarCD?

Some might wonder why. I have a full geometry divided in different parts. I wish to replace one of the part by a mesh (called B) created by an external software.
However, this external mesh is not compressed, so that the numbering of the cells is not 'linear' (I mean: like 10, 11, 12, 13, ....etc)
In StarCD, I could simply select all the cells, and compress the mesh, so that everything is ok.
Actually, I only need that the mesh B is well ordered.
How can I do this in CCM+?
(for the moment, I first import my B mesh into StarCD, compress, and import the compressed one to CCM+ ....)

Thanks for your help


All times are GMT -4. The time now is 03:42.