CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Converting a Converging-Diverging Nozzle to 2D

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 22, 2013, 17:57
Default Converting a Converging-Diverging Nozzle to 2D
  #1
New Member
 
Dimitri
Join Date: Oct 2013
Posts: 2
Rep Power: 0
Dimitri.H is on a distinguished road
Hello,

I am relatively new to Star-CCM+ and I am currently trying to run a design in 2-D as opposed to 3-D. I created a geometry of a converging-diverging nozzle where the channel is in the Z-direction. It continuously keeps saying that there are no boundaries in the Z = 0 plane, when the inlet and outlet of the nozzle clearly lies on the Z = 0 plane. Thank you for any information.

-Dimitri
Dimitri.H is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
normal shock in diverging section of cd nozzle naveenraj Main CFD Forum 0 March 19, 2013 10:41
Flow in a Diverging Nozzle kamyar Main CFD Forum 0 January 25, 2013 11:47
Converging Diverging Nozzle in OpenFOAM danishdude OpenFOAM Running, Solving & CFD 1 September 15, 2012 00:12
help - Running Converging Diverging Nozzle with a shock wave Daco FLUENT 0 September 3, 2012 08:23
compressible flow in a counterflow nozzle d.vamsidhar FLUENT 0 November 24, 2005 02:45


All times are GMT -4. The time now is 02:27.