CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   import geometry of fliud from abaqus for FSI simulation (http://www.cfd-online.com/Forums/star-ccm/125465-import-geometry-fliud-abaqus-fsi-simulation.html)

mina.m October 26, 2013 04:01

import geometry of fliud from abaqus for FSI simulation
 
Hi,

I have imported the geometry of fluid from abaqus with surface mesh method, but The STAR-CMM+ mapper reported that mapping is failed!





please help me, if Someone has already imported the geometry from abaqus.

mina.m October 26, 2013 06:07

please give me any suggestion for import cad geometry of fluid to star ccm for co simulation with abaqus.

nyquisty October 31, 2013 03:25

The surface you export not mean only the fluid wall surface. You have to assign the fluid wall surface in Abaqus to a surface set, then write the whole model to a inp file.

I think you export the fluid wall surface only.

mina.m October 31, 2013 12:32

Quote:

Originally Posted by nyquisty (Post 459960)
The surface you export not mean only the fluid wall surface. You have to assign the fluid wall surface in Abaqus to a surface set, then write the whole model to a inp file.

I think you export the fluid wall surface only.

Dear nyquisty
thanks a lot for your consideration:)


All times are GMT -4. The time now is 12:28.