Star ccm+ training/certification

virendra_p · September 30, 2014, 09:59

Hi ppl...i am looking for institutes/trainers who can provide training for star ccm+ in and around pune (india)...i know there exits a online training program with learncax but i am more interested in class room coaching....any suggestions?

lcarasik · September 30, 2014, 10:07

If you understand how CFD analysis works, then all you need is the tutorials available with the code. That will show you mostly how to get around Star-CCM+. If you're looking to learn how to do CFD analysis, you won't learn that from any commercial training programs.

virendra_p · September 30, 2014, 11:07

But to familiarize with the software won't i need to practice on it? I have a working knowledge of cfd (both coding and software)...i need this training/certification/experience on ccm+ for employment purposes....if i can get my hands on the software itself then it'd be awesome...as I'll just go through the tutorials and master it myself....but i am having a hard time finding a free/educational version of it....the thing is i don't want to waste much time in hunting....so i thought of this approach....what do you suggest?

lcarasik · September 30, 2014, 14:10

As far as I know, CD-Adapco does not offer "certification" for Star-CCM+. CD-Adapco might still offer the gap program: http://www.cd-adapco.com/blog/tammy-...ront-job-queue. You need to contact CD-Adapco to see if this is still possible.

virendra_p · September 30, 2014, 22:55

I did try it....but haven't heard back from them yet....i guess such things take time....also if it's not much trouble...does there exists a low cost version of ccm (say 150-200 usd)....i did search for it but not a lot of info out there

lcarasik · October 1, 2014, 01:44

The only low cost version of it that I know if is under that program. Is there any other CFD program you could look into? Why not try and learn how to use OpenFoam? That might be really useful for a company not looking to buy a license to Star-CCM+.

virendra_p · October 1, 2014, 02:21

True...but there are lot of positions with star ccm+ rite now (don't know why)....but i guess i'll have to look into openFoam at some point too...what really matters for employment is the tools rather than fundamentals....hence the desperation

vijaymali · May 28, 2015, 15:43

Hi Virendra,

I am not sure if you are still looking for the course or you might have learned it by now

Recently, LearnCAx has made all the course FREE including course on STAR CCM+

Check below link for more details:
https://www.learncax.com/about-us/ne...r-cfd-learning

Checkout the course on STAR CCM+
https://www.learncax.com/courses/by-...tar-ccm-detail

Thanks
Vijay

ggulgulia · May 29, 2015, 01:14

Hi Virendra

CD-adapco conducts a basic free 3 day training for CCM+ every month in their local office. If you are interested in that, you should approach the Pune/Bangalore office of CD-adapco. They also provide a certificate for this training.

I myself took this training while I was in university.

sagarmore · January 21, 2016, 03:26

Sir,
Will you please share contact details of concerned authority for training at Pune.
Thanks.

TimCFD · January 30, 2016, 13:36

It should be fine to contact the local support (support-in@cd-adapco.com). They guide you to the responsible person.

September 30, 2014, 09:59	Star ccm+ training/certification	#1
virendra_p Member Virendrasingh Pawar Join Date: Jun 2013 Posts: 47 Rep Power: 12	Hi ppl...i am looking for institutes/trainers who can provide training for star ccm+ in and around pune (india)...i know there exits a online training program with learncax but i am more interested in class room coaching....any suggestions?

May 29, 2015, 01:14		#9
ggulgulia Senior Member Gajendra Gulgulia Join Date: Apr 2013 Location: Munich Posts: 144 Rep Power: 13	Hi Virendra CD-adapco conducts a basic free 3 day training for CCM+ every month in their local office. If you are interested in that, you should approach the Pune/Bangalore office of CD-adapco. They also provide a certificate for this training. I myself took this training while I was in university. sagarmore likes this.

January 21, 2016, 03:26	Star ccm Training	#10
sagarmore New Member Sagar More Join Date: Jan 2014 Location: pune,india Posts: 7 Rep Power: 12	Sir, Will you please share contact details of concerned authority for training at Pune. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem when imported geometry from 3D CAD to star ccm,	TAREK GANAT	STAR-CCM+	1	May 21, 2013 22:15
Problem In Star CCM Plus	ramarya	STAR-CCM+	1	July 10, 2011 05:59
[Other] StarToFoam error	Kart	OpenFOAM Meshing & Mesh Conversion	1	February 4, 2010 04:38
error in star ccm	maurizio	Siemens	3	October 16, 2007 05:17
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15

September 30, 2014, 10:07		#2
lcarasik Senior Member Lane Carasik Join Date: Aug 2014 Posts: 692 Rep Power: 14	If you understand how CFD analysis works, then all you need is the tutorials available with the code. That will show you mostly how to get around Star-CCM+. If you're looking to learn how to do CFD analysis, you won't learn that from any commercial training programs.

September 30, 2014, 11:07		#3
virendra_p Member Virendrasingh Pawar Join Date: Jun 2013 Posts: 47 Rep Power: 12	But to familiarize with the software won't i need to practice on it? I have a working knowledge of cfd (both coding and software)...i need this training/certification/experience on ccm+ for employment purposes....if i can get my hands on the software itself then it'd be awesome...as I'll just go through the tutorials and master it myself....but i am having a hard time finding a free/educational version of it....the thing is i don't want to waste much time in hunting....so i thought of this approach....what do you suggest?

September 30, 2014, 14:10		#4
lcarasik Senior Member Lane Carasik Join Date: Aug 2014 Posts: 692 Rep Power: 14	As far as I know, CD-Adapco does not offer "certification" for Star-CCM+. CD-Adapco might still offer the gap program: http://www.cd-adapco.com/blog/tammy-...ront-job-queue. You need to contact CD-Adapco to see if this is still possible.

September 30, 2014, 22:55		#5
virendra_p Member Virendrasingh Pawar Join Date: Jun 2013 Posts: 47 Rep Power: 12	I did try it....but haven't heard back from them yet....i guess such things take time....also if it's not much trouble...does there exists a low cost version of ccm (say 150-200 usd)....i did search for it but not a lot of info out there

October 1, 2014, 01:44		#6
lcarasik Senior Member Lane Carasik Join Date: Aug 2014 Posts: 692 Rep Power: 14	The only low cost version of it that I know if is under that program. Is there any other CFD program you could look into? Why not try and learn how to use OpenFoam? That might be really useful for a company not looking to buy a license to Star-CCM+.

October 1, 2014, 02:21		#7
virendra_p Member Virendrasingh Pawar Join Date: Jun 2013 Posts: 47 Rep Power: 12	True...but there are lot of positions with star ccm+ rite now (don't know why)....but i guess i'll have to look into openFoam at some point too...what really matters for employment is the tools rather than fundamentals....hence the desperation

May 28, 2015, 15:43		#8
vijaymali New Member Vijay Mali Join Date: Apr 2014 Location: India Posts: 18 Rep Power: 12	Hi Virendra, I am not sure if you are still looking for the course or you might have learned it by now Recently, LearnCAx has made all the course FREE including course on STAR CCM+ Check below link for more details: https://www.learncax.com/about-us/ne...r-cfd-learning Checkout the course on STAR CCM+ https://www.learncax.com/courses/by-...tar-ccm-detail Thanks Vijay

January 30, 2016, 13:36		#11
TimCFD New Member Tim Meier Join Date: Mar 2015 Posts: 16 Rep Power: 11	It should be fine to contact the local support (support-in@cd-adapco.com). They guide you to the responsible person.