|December 2, 2014, 07:05||
Tutorial on Fluidized Bed has convergence issues
Luca Del Bene
Join Date: Nov 2014
Posts: 1Rep Power: 0
I am new to Star CCM+ (v. 8.02). I worked on many tutorials to finally end to the one I need most, the fluidized bed (Eulerian: Bubble Formation in a Fluidized Bed).
The problem with this tutorial is the residuals monitor. It is simply bad as you can see from the attachement. I know that residuals might be bad and I should see other monitors, but I don't know why x and y momentum should be that bad.
The major problem of this bad convergence issue is that when I try to repeat the simulation for a 3D geometry it simply diverges and no solution comes out.
I need to simulate a 3D fluidizied bed similar to the tutorial one (but with full surface bottom air inlet) and I am stucked with convergence issues.
Do you have any help for me, suggestion, books, links, whatever you think can help me to tackle the problem?
|divergence, fluidized bed, three dimensional|
|Thread||Thread Starter||Forum||Replies||Last Post|
|restitution coefficient ofr fluidized bed||T.Hariharanath||FLUENT||19||April 10, 2013 05:43|
|set BC for fluidized bed||NAD||FLUENT||9||September 28, 2012 03:24|
|DDPM for fluidized bed help!!||bene||FLUENT||1||July 12, 2012 21:33|
|BC for fluidized bed||NAD||Main CFD Forum||0||December 2, 2011 05:43|
|Bubbling Fluidized Bed reactor burning biomass||Mattias||FLUENT||6||June 8, 2004 02:53|