RE: Tutorial Lifeboat With Overset Mesh

mathslover74 · March 22, 2015, 22:41

Hi,
After doing the whole Tutorial i extended my time to see further behavior of the boat but it gives me Failure to cut hole in region background. I also do not understand why the boat fly upwards after it lands on water instead

Please advice with thanks

fluid23 · March 23, 2015, 12:27

Good question. I have had weird issues with tutorial files in the past too. I would suggest creating a case on the Steve Portal.

avk1985 · October 12, 2016, 10:21

I also had experienced the same, for this I changed with moment of inertia value from 16000 kgm^2 to 20000 kg-m^2 (if I remember correctly) it worked well for me...

March 22, 2015, 22:41	RE: Tutorial Lifeboat With Overset Mesh	#1
mathslover74 New Member Jason Join Date: Mar 2015 Posts: 2 Rep Power: 0	Hi, After doing the whole Tutorial i extended my time to see further behavior of the boat but it gives me Failure to cut hole in region background. I also do not understand why the boat fly upwards after it lands on water instead Please advice with thanks

October 12, 2016, 10:21		#3
avk1985 New Member avk Join Date: Nov 2011 Posts: 12 Rep Power: 14	I also had experienced the same, for this I changed with moment of inertia value from 16000 kgm^2 to 20000 kg-m^2 (if I remember correctly) it worked well for me... Last edited by avk1985; October 12, 2016 at 11:27.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
Overset MESH problem DFBI 6DOF	Ale85	STAR-CCM+	0	October 1, 2013 12:25
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

March 23, 2015, 12:27		#2
fluid23 Senior Member Matt Join Date: Aug 2014 Posts: 947 Rep Power: 17	Good question. I have had weird issues with tutorial files in the past too. I would suggest creating a case on the Steve Portal.