CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Interface mixing plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 20, 2015, 10:31
Default Interface mixing plane
  #1
Member
 
Join Date: Aug 2014
Posts: 72
Rep Power: 2
MissCFD is on a distinguished road
Hello,

I use an interface mixing plane (interface 2) and I have the following message displayed in the Windows output:

BoundaryCircumferentialBinManager:reProcessBound ary<3>: pre-processing INLET_1 [Interface 2]
BoundaryCircumferentialBinManager:reProcessBound ary<3>: pre-processing INLET_11 [Interface 2]
unequal bin count detected, setting nBins = 39
BoundaryCircumferentialBinManager:reProcessBound ary<3>: pre-processing INLET_1 [Interface 2]
BoundaryCircumferentialBinManager:reProcessBound ary<3>: pre-processing INLET_11 [Interface 2]
39 bins on boundary-0 "INLET_1 [Interface 2]"
39 bins on boundary-1 "INLET_11 [Interface 2]"
initializing transforms on boundary "INLET_1 [Interface 2]"...
initializing transforms on boundary "INLET_11 [Interface 2]"...
Calculating grid flux in region Volume Mesh:VOLUME1
Calculating grid flux in region Volume Mesh:VOLUME2

Does anyone know what it means ''unequal bin count detected, setting nBins = 39'' ? Is it critical ?

Thank you for your help
MissCFD is offline   Reply With Quote

Old   April 22, 2015, 16:47
Default
  #2
Senior Member
 
Matt
Join Date: Aug 2014
Posts: 281
Rep Power: 3
MBdonCFD is on a distinguished road
I suspect it has something to do with how the interface is mapped. I wouldn't worry about it unless your simulation crashes or these are displayed in red in the output window.
MBdonCFD is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixing plane vs frozen rotor feafan STAR-CCM+ 5 August 25, 2014 06:14
mixing plane & mesh interfaces amin.z FLUENT 0 June 24, 2014 01:28
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 17:44
Problem with Mixing plane Mitpostdoc FLUENT 0 July 26, 2011 14:31
Mixing plane for centrifugal compressor Mitpostdoc FLUENT 0 March 24, 2011 18:27


All times are GMT -4. The time now is 23:13.