CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Problems Running Seakeeping Analysis in Headwave

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 28, 2015, 14:37
Default Problems Running Seakeeping Analysis in Headwave
  #1
New Member
 
Join Date: Apr 2015
Posts: 2
Rep Power: 0
JeffStrath is on a distinguished road
Hi there,

I am analysing seakeeping capabilities of a boat in head waves. When I run the simulation, initially everything seems to running smoothly. After a period of 2s the free surface seems to increasing, resulting in dampened head waves and almost linear heave motions.

VOFdamping is set on all faces except symmetry, inlet and the hull. Time-step is adjusted to courant number of 0.4.

The procedure rest of the procedure is the same to the DFBI in head wave simulation.

I'm grateful for any advice,

Thanks,

Jeff
JeffStrath is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running icoFoam. Problems with a 2D Simulation vbesteban OpenFOAM Running, Solving & CFD 2 October 9, 2014 13:33
Having problems running transient fluent simulation in batch mode obylong FLUENT 1 August 14, 2014 23:58
Parallel Running With Problems guilha OpenFOAM Running, Solving & CFD 1 July 26, 2014 10:55
running CFX 11.0 on Fedora 7 : display problems Eric Joubarne CFX 1 October 3, 2007 16:51
Problems in a Background running of Intel Fortran Minsuk Choi Main CFD Forum 2 February 11, 2005 05:55


All times are GMT -4. The time now is 00:13.