|
[Sponsors] |
March 2, 2016, 09:34 |
Error message using Grid Sequencing
|
#1 |
Member
Join Date: Oct 2015
Posts: 47
Rep Power: 10 |
Hi everyone,
I'm running a simulation in coupled flow on a turbocharger and I'm trying to use the Grid Sequencing tool to initialise my problem. My base size is 0.005m, which gives me about 1.5M cells. I haven't got it to converge yet, so I read the documentation and followed the guidelines on the coupled flow model, which told me to increase my base size by a factor of 8 to begin with a coarser mesh and make sure my initial conditions were appropriate. With a base size of 0.005*8=0.04m (approx 50k cells), I got these residuals after 500 iterations: But as soon as I try to halve the base size, I automatically get this error message before the grid sequencing starts: SIGSEGV: memory access exception Command: RunSimulation Recoverability: Non-recoverable ServerStack: [SymInit: Symbol-SearchPath: '.', symOptions: 530, UserName: 's3005462' , OS-Version: 6.1.7601 (Service Pack 1) 0x100-0x1 , 000007FEDB53439F (CoupledFlowModel): (filename not available): CoupledImplicitSolver::gridSequencingInitializatio n , 000007FEDB2F6C13 (CoupledFlowModel): (filename not available): CoupledImplicitSolver:ostInitializeSolution , 000007FEE8390A37 (StarSolve): (filename not available): SolverManager::initializeSolutionObserverUpdate , 000007FEEE7779F7 (StarNeo): (filename not available): Subject::notify , 000007FEEE778460 (StarNeo): (filename not available): Subject::notify , 000007FEEB102DB1 (StarCommon): (filename not available): Solution::initializeSolution , 000007FEE844A73D (StarSolve): (filename not available): SimulationIterator::startSimulation , 000007FEE84F933E (StarSolve): (filename not available): RGradVarBase::autoAllocateStorage , 000007FEEE76053D (StarNeo): (filename not available): Controller::executeCommand , 000007FEEE75F5A1 (StarNeo): (filename not available): Controller:rocessCommands , 000007FEED07AAC0 (StarMachine): (filename not available): CommandController::scatterCommand , 000007FEED079D13 (StarMachine): (filename not available): CommandController:rocessCommands , 000007FEECFC8FEA (StarMachine): (filename not available): Machine::startServerHost , 000007FEECFBB8ED (StarMachine): (filename not available): Machine::main , ERROR: SymGetSymFromAddr64, GetLastError: 487 (Address: 000000013F4C143C) , 000000013F4C143C (star-ccm+): (filename not available): (function-name not available) , ERROR: SymGetSymFromAddr64, GetLastError: 487 (Address: 000000013F4CA2B7) , 000000013F4CA2B7 (star-ccm+): (filename not available): (function-name not available) , 0000000076E059ED (kernel32): (filename not available): BaseThreadInitThunk , 0000000076F3B371 (ntdll): (filename not available): RtlUserThreadStart ] Signal: SIGSEGV: memory access exception error: Server Error It seems it has something to do with my computer's memory right? Basically I'm able to run a simulation with a fairly coarse mesh but as soon as I try to refine it even a tiny bit, the computer seems to get overwhelmed and the simulation crashes right away. I'd really like to use GS here as it proved to be very efficient on my coarser models. Any way to fix this? Thanks for your help! Jambond |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to make grid for LES simulation | dinhanh | Main CFD Forum | 3 | November 11, 2015 03:37 |
Generating elliptic grid around NACA SC2-0714 airfoil | DA6righthand | Main CFD Forum | 20 | November 3, 2015 08:50 |
grid on a circle | HaKu | Main CFD Forum | 4 | April 15, 2010 12:56 |
GRID TO GRID INTERPOLATION in FLUENT | calogero | FLUENT | 3 | June 4, 2003 09:32 |
Numerical methods for discontinuous grid interfaces? | Hansong Hang | Main CFD Forum | 12 | September 16, 1998 23:26 |