CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Interior faces (http://www.cfd-online.com/Forums/star-ccm/63255-interior-faces.html)

bramv101 April 2, 2009 08:32

Interior faces
 
Hi all,

In gambit/Fluent it is possible to create interior faces, is there a way to create these in starCCM WITHOUT having to use interfaces.
Derived parts comes to mind, but i have not find a way to create a complex shape with these, or for that matter snap this to existing geometrie.

regards,
Bram

ping April 16, 2009 06:28

Internally created derived 'section' parts can only be planes, cylinders, spheres, but you also have to option to have an arbitrary section - an imported surface as an STL file. This can be created internally say as an iso-surface, existing imported or remeshed surface etc then exported, or externally in your CAD system or STAR-Design.

Lilu May 18, 2009 19:54

Could I ask for a little more information? What is the purpose of the internal surfaces?

bramv101 May 19, 2009 06:45

interior faces allow you to create faces that dont participate in the solution. this makes it very easy to switch on/off certain surfaces.
--> when testing narrowing of an orifice you dont need to mesh it all over again and so on...


All times are GMT -4. The time now is 09:50.