CFD Online Logo CFD Online URL
Home > Forums > STAR-CCM+

Problems with 011

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 17, 2009, 03:59
Default Problems with 011
Senior Member
Join Date: Mar 2009
Posts: 203
Rep Power: 9
Maddin is on a distinguished road
Hey guys,

We updated to 4.02.011, before we had 4.02.007
When I let write a scene in a file after each time step (unsteady sim) then the run takes a time out till I close the CCM. When I have closed it (the GUI, not the run) then it "waits" till I loged in.
I had a seen with the courant number. I will try and tell you when it happens with other field functions.

Does somebody know if the problem with the mass flow calculation is solved?
When you make a CCM V.3 simulation you get a mass flow X.
When you start this simulation in V4 you also get the massflow X BUT sometimes you get a massflow Y, when the geometry is different.

In front of the courant number I have some meshing problems with easy geomtry. I will make some screenshots and then I post it. The Layer Thickness on Edges is my problem, with Trimm Mesher I get there some adverse cells...

Maddin is offline   Reply With Quote

Old   June 29, 2009, 07:49
Senior Member
Join Date: Mar 2009
Posts: 203
Rep Power: 9
Maddin is on a distinguished road
Scene update problem is a 4.02.011 problem. I tested it.
When you make a run you must have run the GUI on the simulation or it will make a break on the step where you want to have a screenshot.

The mesh problem I already have, I only "solved" it with a offset... but not a good soluation in my mind...
Maddin is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Needed Benchmark Problems for FSI Mechstud Main CFD Forum 4 July 26, 2011 12:13
Some problems with Star CD Micha CD-adapco 0 August 6, 2003 13:55
unstructured grid sreekanth Main CFD Forum 1 August 6, 2001 15:09
Using Fluent for Geophysical Problems Hassid Samuel FLUENT 0 February 23, 2001 07:04
Inverse problems Aleksey Alekseev Main CFD Forum 0 May 12, 1999 15:38

All times are GMT -4. The time now is 23:56.