CFD Online Logo CFD Online URL
Home > Forums > STAR-CCM+

Exporting Cell set from STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 13, 2009, 14:47
Default Exporting Cell set from STAR CCM+
Senior Member
Join Date: Apr 2009
Location: Racine WI
Posts: 148
Rep Power: 8
vishyaroon is on a distinguished road
I use STAR CCM+ on a daily basis, but due to some IT policies we have not upgraded the version from 3.06. I know that we'll get version 4.04 in a couple of days.

Meanwhile I wanted to find out if there are any additional capabilities that have been added as far as working with cell sets are concerned.

1. I am looking to export a particular cell set from STAR CCM+ to work with it, but was not sure if this can be done (both in the old 3.06 version as well as the latest ones).
2. An alternative to this which I can live with is to change the characteristics of a cell set, which is analogous to cmodify cset command in STAR CD.

Any ideas or inputs will be appreciated.
vishyaroon is offline   Reply With Quote


cell set, exporting

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Instalation on ubuntu 710 basilwatson OpenFOAM Installation 17 March 16, 2012 21:16
Installation problems indy OpenFOAM Installation 7 April 3, 2009 09:40
how to make animation in star ccm *NM* raziftech CD-adapco 3 October 17, 2007 02:35
error in star ccm maurizio CD-adapco 3 October 16, 2007 05:17
udf to set vel. = 0 at a grid point or a cell Ralf Schmidt FLUENT 0 September 22, 2006 09:45

All times are GMT -4. The time now is 13:18.