Mapping CFD results into FEA

chittoorreddy · August 9, 2009, 23:40

I am using star ccm+ to simulate a conjugate heat transfer problem. Now i want carryout FEA analysis in ANSYS of the same by mapping HTC's from the CFD analysis. when I am trying to export HTC,s from the star ccm+, it is exporting total domain and it is not able to export only the surface which want to export. is there anyway to export the HTC's on the surface from star ccm+ to ansys. I dont have abaqus (which have direct interface between starccm+).

vishyaroon · August 10, 2009, 09:51

Do you have access to STAR CD? The process you are trying out is a routine activity for me. We export the hf values from STAR CCM+. Go to File > Export and then select the *.cel format to export to (the default is *.ccm). Then you have to take these cel, vrt and daten files to STAR CD and map in using STAR CD. If you need help in mapping it in STAR CD, let me know. I can give you the set of commands that you can use to get the mapping done.

We have to follow this as they still do not have a way of mapping or exporting it in ANSYS readable format in STAR CCM+ as yet.

chittoorreddy · August 12, 2009, 04:28

Thank you vishyaroon.
I have access to STAR CD, can you pls send that set of commands.

vishyaroon · August 12, 2009, 11:35

I've sent a private message with the set of commands.

chittoorreddy · August 13, 2009, 00:12

Thank you so much.
I will try and let you know wt happen.
Once again with lots of thanks.

babyhanyu · August 17, 2009, 04:18

may i know the commands too? I need to do the same thing now. thanks!

August 9, 2009, 23:40	Mapping CFD results into FEA	#1
chittoorreddy New Member chittoorreddy Join Date: Aug 2009 Posts: 5 Rep Power: 16	I am using star ccm+ to simulate a conjugate heat transfer problem. Now i want carryout FEA analysis in ANSYS of the same by mapping HTC's from the CFD analysis. when I am trying to export HTC,s from the star ccm+, it is exporting total domain and it is not able to export only the surface which want to export. is there anyway to export the HTC's on the surface from star ccm+ to ansys. I dont have abaqus (which have direct interface between starccm+).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Matching CFD results and wind tunnel testing	huskerwong	Main CFD Forum	0	July 16, 2009 14:24
CFD vs Experimetal Results for Aerofoil	aceofharts414	Main CFD Forum	0	April 22, 2009 07:14
Results saving in CFD	hawk	Main CFD Forum	16	July 21, 2005 20:51
STAR-Works : Mainstream CAD with CFD	CD adapco Group Marketing	Siemens	0	February 13, 2002 12:23
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10

August 10, 2009, 09:51		#2
vishyaroon Senior Member Aroon Join Date: Apr 2009 Location: Racine WI Posts: 148 Rep Power: 17	Do you have access to STAR CD? The process you are trying out is a routine activity for me. We export the hf values from STAR CCM+. Go to File > Export and then select the .cel format to export to (the default is .ccm). Then you have to take these cel, vrt and daten files to STAR CD and map in using STAR CD. If you need help in mapping it in STAR CD, let me know. I can give you the set of commands that you can use to get the mapping done. We have to follow this as they still do not have a way of mapping or exporting it in ANSYS readable format in STAR CCM+ as yet.

August 12, 2009, 04:28		#3
chittoorreddy New Member chittoorreddy Join Date: Aug 2009 Posts: 5 Rep Power: 16	Thank you vishyaroon. I have access to STAR CD, can you pls send that set of commands.

August 12, 2009, 11:35		#4
vishyaroon Senior Member Aroon Join Date: Apr 2009 Location: Racine WI Posts: 148 Rep Power: 17	I've sent a private message with the set of commands.

August 13, 2009, 00:12		#5
chittoorreddy New Member chittoorreddy Join Date: Aug 2009 Posts: 5 Rep Power: 16	Thank you so much. I will try and let you know wt happen. Once again with lots of thanks.

August 17, 2009, 04:18		#6
babyhanyu New Member Join Date: Aug 2009 Posts: 1 Rep Power: 0	may i know the commands too? I need to do the same thing now. thanks!