CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   How to use K-ε RNG turbulence model (http://www.cfd-online.com/Forums/star-ccm/68308-how-use-k-rng-turbulence-model.html)

AirWolf September 15, 2009 01:38

How to use K-ε RNG turbulence model
 
Hi, I'm a newbie here.
I want to ask all of u.
Where can I find this K-ε RNG turbulence model?
I only can find K-Epsilon, K-Omega, Reynold Stress and Spallart Allmaras.
I reall hope u guys can help me:)

umau October 8, 2009 10:29

oits
 
tnye boss sudey...
bdk2 blek boss kn hbt2 belaka...
ape da..

umau October 8, 2009 11:43

dpt x??
kalo xdpt gak,aku leh arrange ko jmpe lec aku...
dia ok je..

vishyaroon October 13, 2009 11:49

STAR CCM+ does not have RNG k-e model. However you can select between AKN, Realizable (normal and two-layer), standard (normal, low Re and two-layer) and the V2F k-e models from STAR CCM+.

By default I guess teh standard two-layer model is selected. However you can unselect this and choose any of the others.

muthuvelcfd October 20, 2009 06:23

Stephenraj
 
During the selection of physical model selection if you de select the auto select physicl recommened model you can able to the various types of ke models


All times are GMT -4. The time now is 05:18.