CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Inlet Pressure... (http://www.cfd-online.com/Forums/star-ccm/69870-inlet-pressure.html)

mardit November 7, 2009 08:32

Inlet Pressure...
 
Hi guys,

I have got a channel (diameter 110m) and at the inlet I need to specify gas flow rate (for example 1LPM) and pressure as well (for example 100Pa). Is there any way to specify both at the same time?!

Maddin November 9, 2009 06:45

Not really but when you set a mass flow you can work with temperature of the gas.
But you have to set all gas properties on temperature-sensitive - viscocity is important.


All times are GMT -4. The time now is 08:27.