CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   An Invisible Boundary (http://www.cfd-online.com/Forums/star-ccm/71403-invisible-boundary.html)

Alpro_Soya December 30, 2009 14:00

An Invisible Boundary
 
Hi,

I'd like to start either a prism layer or an extruded mesh within my domain, not on a boundary. Ideally, I would create a boundary that was 'invisible' and then use this to create my desired mesh.

This is simlar in concept to how you would use a volumetric shape to make the grid finer in a particular region.

Is it possible to create such a boundary or similar? For example, I have been experimenting with volumetric shapes, but with no success.

All the best,

AS

seang December 31, 2009 09:09

try setting a wall for that boundary, mesh it, then change the boundary to something else?


All times are GMT -4. The time now is 18:06.