CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   What is the meaning of "update the geometry" in cd-adapco press info (http://www.cfd-online.com/Forums/star-ccm/73639-what-meaning-update-geometry-cd-adapco-press-info.html)

rubenk March 13, 2010 00:01

What is the meaning of "update the geometry" in cd-adapco press info
 
I've been using Fluent for a while but am always interested in advances in other products.

I recently got excited because I see that Star-CCM+ advertises "post-process, update the geometry and automatically rerun the calculation, all within a single coherent environment..."

Does this mean that I can take a simulation I am working in and then modify my geometry after my sim without needing to reenter boundary conditions, etc? Just, for example, shorten a wall, move a curve and reclose geometry. Click "go" and it'll remesh and run the simulation out of the box?

TMG March 15, 2010 20:28

Yes that is exactly what it means.

Vinicius March 16, 2010 16:21

You also can create simple geometries with parametric dimensions and make design studies within STAR-CCM+. And, as you said, it is also possible import a new similar geometry with some modifications and use the previous solution as the initial conditions of the new one.


All times are GMT -4. The time now is 06:34.