|March 15, 2010, 08:22||
look up the courant number
Join Date: May 2009
Posts: 16Rep Power: 9
I'm pretty new in CFD and I've a problem with reversed flow at my pressure outlet. So i looked it up in the online Help.
I just found the conection between reversed flow and Courant Number and Under-relaxation-factor. Where can i look it up? Or does CCM+ compute it for each simulation and each time step for it self?
Thank you very much!
|March 16, 2010, 16:36||
Join Date: Mar 2009
Location: Sao Paulo, Brazil
Posts: 80Rep Power: 9
In STAR-CCM+ simulation tree, open the Solverīs node. There you can find the places where you can change the under-ralaxation factors and the size o time-step. The courant number just can be modified if the coupled flow solver was selected.
In star-ccm+ help you can find many information about that.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Mesh Refinement||Luiz Eduardo Bittencourt Sampaio (Sampaio)||OpenFOAM Mesh Utilities||41||January 17, 2013 03:43|
|DecomposePar unequal number of shared faces||maka||OpenFOAM Pre-Processing||6||August 12, 2010 09:01|
|Unaligned accesses on IA64||andre||OpenFOAM||5||June 23, 2008 10:37|
|Could anybody help me see this error and give help||liugx212||OpenFOAM Running, Solving & CFD||3||January 4, 2006 19:07|
|Trimmed cell and embedded refinement mesh conversion issues||michele||OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...||2||July 15, 2005 04:15|