cell skewness

arunjingade · June 20, 2010, 10:06

hello friends,

i am a new kid in CFD. I am using starCCM+ for one of my projects. It would be of great help if you could explain what is "cell skewness" and why is it important. also please indicate a better value for cell skewness and explain why it is better.

many thanks,

arun

Vinicius · June 21, 2010, 10:13

Try to use it always below than 85 degrees.. this is how much the cell is distorted from a perfect one... try to google it!

arunjingade · June 23, 2010, 07:37

Hi,

That was quite helpful.Yes I will try googling it. But i thought people who are actually into CFD can give a better explanation. But yeah "85 degree" was quite helpful. Thank you.

June 20, 2010, 10:06	cell skewness	#1
arunjingade New Member Arun Join Date: Jun 2010 Posts: 10 Rep Power: 15	hello friends, i am a new kid in CFD. I am using starCCM+ for one of my projects. It would be of great help if you could explain what is "cell skewness" and why is it important. also please indicate a better value for cell skewness and explain why it is better. many thanks, arun

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cells with t below lower limit	Purushothama	Siemens	2	May 31, 2010 21:58
How to determine the direction of cell face vectors on processor patches	sebastian_vogl	OpenFOAM Running, Solving & CFD	0	October 27, 2009 08:47
Severe nonorthogonality and severe skewness problem	qtian	OpenFOAM Running, Solving & CFD	2	January 22, 2008 18:47
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Meshing & Mesh Conversion	2	July 15, 2005 04:15
Warning 097-	AB	Siemens	6	November 15, 2004 04:41

June 21, 2010, 10:13		#2
Vinicius Member Vinicius Girardi Join Date: Mar 2009 Location: Sao Paulo, Brazil Posts: 80 Rep Power: 17	Try to use it always below than 85 degrees.. this is how much the cell is distorted from a perfect one... try to google it!

June 23, 2010, 07:37		#3
arunjingade New Member Arun Join Date: Jun 2010 Posts: 10 Rep Power: 15	Hi, That was quite helpful.Yes I will try googling it. But i thought people who are actually into CFD can give a better explanation. But yeah "85 degree" was quite helpful. Thank you.