CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Singular Axis Boundary for 3d Wedge Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 23, 2010, 09:57
Default Singular Axis Boundary for 3d Wedge Mesh
  #1
Member
 
jonathan
Join Date: Jun 2009
Posts: 47
Rep Power: 9
jonny_b is on a distinguished road
I imported a Plot3d volume mesh into Star-CCM with multiple regions, each region containing a single default boundary. I am splitting up the surfaces according to angle but I cannot seem to find out how to split up my surface along the centerline of my wedge mesh from the rest of the surfaces. I have attached an image showing the "singular axis" surface I'm trying to separate out from the rest of the surfaces. I'm new to Star-CCM so I don't know if it plays nice with imported 3D structured wedge meshes. Any advice is very appreciated.

Jonathan
Attached Images
File Type: jpg ge2151ta_Mesh.jpg (59.9 KB, 29 views)
jonny_b is offline   Reply With Quote

Old   August 5, 2010, 09:22
Default
  #2
Member
 
jonathan
Join Date: Jun 2009
Posts: 47
Rep Power: 9
jonny_b is on a distinguished road
So, after learning more about how unstructured solvers work, I realized that I am an idiot. There is no collapsed surface at the centerline because the solver uses face flux values for solving.

I am used to having to specify a special boundary condition for centerline mesh points in a structured solver.

Consider this question closed.
jonny_b is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluid-Structure-Interaction on wedge mesh WiWo OpenFOAM 6 March 6, 2010 08:18
increasing mesh quality is leading to poor convergence tippo CFX 2 May 5, 2009 10:55
Convergence moving mesh lr103476 OpenFOAM Running, Solving & CFD 30 November 19, 2007 15:09
Boundary Layer with Tet mesh Josh FLUENT 0 February 9, 2007 02:40
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 12:44.