CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Graphic errors in STAR CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 4, 2010, 05:01
Default Graphic errors in STAR CCM+
  #1
New Member
 
Join Date: Aug 2010
Posts: 2
Rep Power: 0
Mathias86 is on a distinguished road
Hi. My name is Mattia and I'm a student of the University of Pisa.
I'm sorry but i don't understand my problem very well and my bad English don't help me to explain you .
I've a Star CCM+ v.5.04 but the residual plot and my monitor plot I've set to control the convergence didn't work very well. In fact residual plot, later about 5000 iteration, starts drawing lines randomly. it's very difficult to explain so i make some screenshots.

http://img217.imageshack.us/img217/9905/immagine1an.png
http://img155.imageshack.us/img155/8751/immagine2nt.png
http://img713.imageshack.us/img713/9241/immagine3af.png
http://img30.imageshack.us/img30/9153/immagine4kz.png
http://img52.imageshack.us/img52/9716/immagine5m.png

Thanks a lot for any help.
Mattia
Mathias86 is offline   Reply With Quote

Old   August 5, 2010, 03:20
Default
  #2
New Member
 
Join Date: Jul 2010
Posts: 29
Rep Power: 7
bengy is on a distinguished road
hello,
it is not an error. you have to set higher value of "maximum plot samples" (monitors - default value is 5000).

regards
bengy is offline   Reply With Quote

Old   August 5, 2010, 05:07
Default
  #3
New Member
 
Join Date: Aug 2010
Posts: 2
Rep Power: 0
Mathias86 is on a distinguished road
so i have to put in the "maximum plot samples" a value greater than the number of my iteration. It's correct ?

Thanks a lot for your help.
Mattia
Mathias86 is offline   Reply With Quote

Old   August 5, 2010, 05:12
Default
  #4
New Member
 
Join Date: Jul 2010
Posts: 29
Rep Power: 7
bengy is on a distinguished road
.....yup:]
bengy is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 15:33
Building OpenFOAM1.7.0 from source ata OpenFOAM Installation 42 May 14, 2012 20:48
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 02:58
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 04:51.