CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   importing geometry into starccm (http://www.cfd-online.com/Forums/star-ccm/82518-importing-geometry-into-starccm.html)

krishna086 November 28, 2010 22:54

importing geometry into starccm
 
hi friends,

i am working with a very complicated combustor geometry; when i try importing the geometry into starccm, in x_t format, this is what i get ,


Error during CAD import: Parasolid function PK_TOPOL_facet_2 failed.
Error token = PK_ERROR_memory_full
Error code = 901
Severity = serious
Parasolid function PK_TOPOL_facet_2 failed.
Error token = PK_ERROR_memory_full
Error code = 901
Severity = serious:


does anyone understand the meaning of this error?? all i understand is that the geometry has numerous bad faces which i observed from solidworks; but its very difficult to really make the whole geometry again!!!

even if i try importing it as a CAD i will have to convert it into a geometry part; but it is not allowing me to do that


please help asap.

thanks,


All times are GMT -4. The time now is 02:28.