CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   how to rotate a valve in a mesh (http://www.cfd-online.com/Forums/star-ccm/82826-how-rotate-valve-mesh.html)

theshark03 December 7, 2010 05:54

how to rotate a valve in a mesh
 
I need to simulate a flow that involves a valve. The simulation is stationary. I have already generated the mesh and the simulation runs fine. Now I need to turn the valve again without generating the mesh. It can be done with the "Morpher"? If so, how?

PS: the flow and the valve are two distinctive mesh, linked by an interface.

http://img695.imageshack.us/img695/3...rmata1o.th.png

thanks.

Uploaded with ImageShack.us

abdul099 January 7, 2011 22:42

You can do it with the morpher, but expect it to take a lot of time.
When you need some help with the morpher, just let me know.


All times are GMT -4. The time now is 03:29.