 |
 |
 |
|
|
|
[Sponsors] | ||||
December 7, 2010, 04:54
|
how to rotate a valve in a mesh
|
#1 |
|
New Member
Join Date: Dec 2010
Posts: 1
Rep Power: 0  |
I need to simulate a flow that involves a valve. The simulation is stationary. I have already generated the mesh and the simulation runs fine. Now I need to turn the valve again without generating the mesh. It can be done with the "Morpher"? If so, how?
PS: the flow and the valve are two distinctive mesh, linked by an interface.  thanks. Uploaded with ImageShack.us |
|
|
|
|
|
January 7, 2011, 21:42
|
|
#2 |
|
Senior Member
Join Date: Oct 2009
Location: Germany
Posts: 636
Rep Power: 21 |
You can do it with the morpher, but expect it to take a lot of time.
When you need some help with the morpher, just let me know. |
|
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [snappyHexMesh] Number of cells in mesh don't match with size of cellLevel | colinB | OpenFOAM Meshing & Mesh Conversion | 14 | December 12, 2018 08:07 |
| [snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
| [ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
| fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 11:55 |
| Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |
Linear Mode
