CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

[Urgent] Help with turbowizard. Unable to open file :(

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 7, 2010, 09:59
Default [Urgent] Help with turbowizard. Unable to open file :(
  #1
New Member
 
Suta Setasena
Join Date: Dec 2010
Posts: 1
Rep Power: 0
trustworthy_86 is on a distinguished road
Hallo,
I come from Indonesia. sorry if my English is not good enough.

need some advices for a problem i cannot solve alone.
Right now, I am doing a Turbomachinery Tutorial. it demonstrates the steps required for a turbomachinery simulation in Star CCM+ using the Turbo Wizard.

the Single Row Tutorial illustrates the simulation of an axial compressor blade in Star CCM+ and goes through the process of creating a mesh for a single blade row.

I have followed step by step all directions that was given in the tutorials. but when I click "OK" to generate the volume mesh, it appears something that really hates me :

Error
Exeption:
BladeImporter:penFile(Z:\......bla bla...\axialSingleRow\Rotor37.estg):
Unable to open file.

can anybody help me?
FYI: all of the tutorals is illustrated in page 6113, User Guide Star-CCM+ Version 5.04.006, Turbomachinery Tutorials

In the "Importing the turbo Blades and Generating the Mesh" sub titel, we were told to create a sub-directory for the tutorial called axialSingleRow. and then, we were also told to copy the
Rotor37.estg
, inlet.bndy, exit.bndy, hub.bndy and tip.bndy files from the doc/tutorials/axialSingleRow subdirectory of my

STAR-CCM+ installation into this directory.

what I did is just create a new directory named "axialSingleRow" in my private harddisk and copy paste all the .estg and .bndy files in this directory. was this the cause from the problem??

does anybody have an idea why it doesn't run??
please help me

thank you for your attention.
trustworthy_86 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
tecio compilation errors in latest 1.6.x rsamuel OpenFOAM Bugs 1 December 22, 2009 04:34
Compiling gmshFoam with OpenFOAM-1.5 BlGene Open Source Meshers: Gmsh, Netgen, CGNS, ... 10 August 6, 2009 04:26
Results saving in CFD hawk Main CFD Forum 16 July 21, 2005 20:51
PHI file structure Eugene Phoenics 9 November 2, 2001 23:00


All times are GMT -4. The time now is 12:36.