|January 13, 2011, 14:51||
what solver for 90° turbulent bender airflow
Join Date: Jan 2011
Posts: 9Rep Power: 6
i want to validate a airflow throw a 90° bender with high Re around 100000-200000, diameter 0,2m
eventually i have to define a rough wall afterwards but first i want to handle the problem in smooth mode...
is there any suggestion on wich solver i have to choose and if there is a solver how high/low y+ should be in this case?
thx for help
|January 15, 2011, 09:21||
Join Date: Oct 2009
Posts: 637Rep Power: 13
Which Y+ value you should maintain doesn't depend on the solver but on the turbulence model.
Low-re model = Y+ < 1
High-re model = 30 < Y+ < ~150
Two layer model = theoretically "arbitrary Y+ < 150", but avoid the range from lets say 2 to 20.
For other solver settings and a recommendation just have a look on the answer to your other post with the same topic from about 2 hours earlier.
By the way, there will be no faster answer when posting twice. Most people here will not earn money with posting hints and hence are not waiting the whole day for new posts. So it can take some time until a question is read by somebody who knows an answer.
|Thread||Thread Starter||Forum||Replies||Last Post|
|2D differentially heated cavity, which is appropriate solver?||vetnav||OpenFOAM||11||May 26, 2014 12:06|
|Stability problem due to turbulent dispersion force in a subcooled boiling model||Edy||OpenFOAM||7||August 10, 2011 12:00|
|CFX 5.5||Roued||CFX||1||October 2, 2001 16:49|
|Setting a B.C using UserFortran in 4.3||tokai||CFX||10||July 17, 2001 16:25|
|Error during Solver||cfd guy||CFX||4||May 8, 2001 06:04|