CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Explicit derived plane (http://www.cfd-online.com/Forums/star-ccm/85389-explicit-derived-plane.html)

Dan Chambers February 24, 2011 08:21

Explicit derived plane
 
Hi all,

I'm trying to create a derived plane on a solution so I can do a surface integral, however I wish to put the plane on specific co-ordinates. (over he core of a vortex so I can calculate the circulation). I can only find how to create a plane in Star CCM+ that snaps to the whole region, and so far have been unable to create a plane using my specified co-ordinates. Can anyone advise me on how to create a custom derived plane to the co-ordinates I want?

Thanks
Dan

rwryne February 24, 2011 16:47

Bit confused if you are wanting to make a plane at an (x,y,z) you know now, or an (x,y,z) you will calculate, but if the former:

Right click on Derived Parts -> New Part->Section->Plane

f-w February 25, 2011 12:45

Derived Parts -> New Part -> Section -> Constrained Plane

Read the help file for details.

Dan Chambers March 4, 2011 08:23

Thanks guys, ended up using an arbitary plane that has got the job done!


All times are GMT -4. The time now is 22:57.