Refine mesh in a specific region

mirel · February 11, 2011, 03:33

I have a very good mesh file created with ICEM. With simulations in Star CCM+ I realized I need to refine a specific region of the mesh, but don´t know how to do it. Any ideas?
(since I don´t have the ICEM block file, refining the mesh with ICEM is not a good option either)
Thank you in advance

RobertB · February 11, 2011, 08:09

If you have a STAR license as well you could do it there and import.

I am not aware that you can locally re-refine an existing mesh in CCM+.

girishg · February 25, 2011, 13:17

create volume shapes from tools tab. volume shape is the area where u want different mesh density. then create new volumetric control in mesh tab and add the created volume shape to it. you can adjust the cell size for respective volumetric control.

February 11, 2011, 03:33	Refine mesh in a specific region	#1
mirel New Member Mireia Join Date: Feb 2011 Posts: 2 Rep Power: 0	I have a very good mesh file created with ICEM. With simulations in Star CCM+ I realized I need to refine a specific region of the mesh, but don´t know how to do it. Any ideas? (since I don´t have the ICEM block file, refining the mesh with ICEM is not a good option either) Thank you in advance

February 25, 2011, 13:17		#3
girishg New Member Girish Gaikwad Join Date: Apr 2010 Posts: 11 Rep Power: 15	create volume shapes from tools tab. volume shape is the area where u want different mesh density. then create new volumetric control in mesh tab and add the created volume shape to it. you can adjust the cell size for respective volumetric control. kamillaa, YHBen, nithishgupta and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cht tutorial in 15	braennstroem	OpenFOAM Running, Solving & CFD	197	June 10, 2015 03:02
[Commercial meshers] Using starToFoam	clo	OpenFOAM Meshing & Mesh Conversion	33	September 26, 2012 04:04
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
About defination of mesh region	koukouken	CFX	2	January 16, 2006 18:45
Mesh	Mignard	FLUENT	2	March 22, 2000 05:12

February 11, 2011, 08:09		#2
RobertB Senior Member Robert Join Date: Jun 2010 Posts: 117 Rep Power: 16	If you have a STAR license as well you could do it there and import. I am not aware that you can locally re-refine an existing mesh in CCM+.