Import the .csv as the data for scalar field

Rinia · November 21, 2021, 05:24

Hi, CFDers

The field in star ccm+ could be export as a .csv file, including the coordinate and field data.

I have a question that, if the .csv file that includes the coordinate and field data could be import to the star ccm+ again to construct a field? Or this could be achieved in other software?

Anyone has done the similar thing? Thanks in advance.

FliegenderZirkus · November 21, 2021, 06:43

Yes, that is possible in two steps
1) Create a new File Table with the .csv as input
2) Create a Tabular Data Mapper and specify the appropriate target (surface or volume)

Rinia · November 21, 2021, 06:56

Quote:

Originally Posted by FliegenderZirkus

Yes, that is possible in two steps
1) Create a new File Table with the .csv as input
2) Create a Tabular Data Mapper and specify the appropriate target (surface or volume)

Thanks for your instant reply, and it works.

November 21, 2021, 05:24	Import the .csv as the data for scalar field	#1
Rinia Member Rinia Join Date: Jan 2018 Posts: 42 Rep Power: 8	Hi, CFDers The field in star ccm+ could be export as a .csv file, including the coordinate and field data. I have a question that, if the .csv file that includes the coordinate and field data could be import to the star ccm+ again to construct a field? Or this could be achieved in other software? Anyone has done the similar thing? Thanks in advance.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[General] Extracting ParaView Data into Python Arrays	Jeffzda	ParaView	30	November 6, 2023 21:00
[OpenFOAM] Field data over a polyline using Programmable filter	vishwasvemra	ParaView	1	December 23, 2020 10:27
External Magnetic Field Data Format for FLUENT MHD Module	eduardvinter	FLUENT	0	January 24, 2019 01:54
[Other] dynamicTopoFVMesh and pointDisplacement	RandomUser	OpenFOAM Meshing & Mesh Conversion	6	April 26, 2018 07:30
may i import flow field data to do particle track?	Hao	FLUENT	8	April 29, 2008 08:22

November 21, 2021, 06:43		#2
FliegenderZirkus Member Join Date: Nov 2019 Posts: 93 Rep Power: 6	Yes, that is possible in two steps 1) Create a new File Table with the .csv as input 2) Create a Tabular Data Mapper and specify the appropriate target (surface or volume)