CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Rotor stator with STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/87074-rotor-stator-star-ccm.html)

Andrrin April 11, 2011 04:56

Rotor stator with STAR-CCM+
 
Hy to all,
I am quite new to Star-CCM+. I have to simulate a simply 2D axial rotor/stator System.
Assume the mesh as a rectangule with vertex named ABCD:
AB rotor side
BC atm pressure
CD stator side
DA axis.

I have set the boundary condition basically setting on AB tangential velocity speed around DA but acutally nothing happend.

How can I make it?Is there any particular option to be set?

thankyou

Maicol April 12, 2011 08:19

Can you attach an image of what you mean?

Andrrin April 12, 2011 08:31

1 Attachment(s)
Hy, I make a quick paint sketch..
hope it's enought!

thanks

Far April 12, 2011 11:57

you have to divide domain into two fluids in gambit (or any other mesh generation software ) and need to create the interface on that boundary


All times are GMT -4. The time now is 14:04.