 |
 |
 |
|
|
|
[Sponsors] | ||||
June 1, 2011, 13:20
|
please help me
|
#1 |
|
New Member
Almaz
Join Date: Dec 2009
Location: Russia
Posts: 7
Rep Power: 5  |
How to make the transfer of heat from the hot gas flow on the metal. What models should be asking? please help.
|
|
|
|
|
|
June 1, 2011, 14:31
|
|
#2 |
|
Senior Member
Pauli
Join Date: Mar 2009
Posts: 168
Rep Power: 6 |
In the on-line help, see
Training Guide > Heat Transfer Tutorials > Heated Fin Tutorial |
|
|
|
|
|
|
June 1, 2011, 14:37
|
|
#3 |
|
New Member
Almaz
Join Date: Dec 2009
Location: Russia
Posts: 7
Rep Power: 5 |
In this tutorial, heat transfer from metal to fluid. but I need the opposite.
|
|
|
|
|
|
|
June 1, 2011, 16:57
|
|
#4 |
|
Senior Member
Pauli
Join Date: Mar 2009
Posts: 168
Rep Power: 6 |
So change the boundary conditions.
|
|
|
|
|
|
|
June 1, 2011, 23:03
|
|
#5 |
|
New Member
Almaz
Join Date: Dec 2009
Location: Russia
Posts: 7
Rep Power: 5 |
Tried it, does not work.
|
|
|
|
|
|
|
June 3, 2011, 12:47
|
|
#6 |
|
Senior Member
Pauli
Join Date: Mar 2009
Posts: 168
Rep Power: 6 |
Works for me.
|
|
|
|
|
|
|
June 3, 2011, 13:11
|
|
#7 |
|
New Member
Almaz
Join Date: Dec 2009
Location: Russia
Posts: 7
Rep Power: 5 |
Are you in the boundary conditions only the temperature changed? or something.
|
|
|
|
|
|
|
June 3, 2011, 13:24
|
|
#8 |
|
Senior Member
Pauli
Join Date: Mar 2009
Posts: 168
Rep Power: 6 |
500K air flowing left to right. Left wall is a 0.5m/s velocity boundary. Right wall is flow split outlet. Fin base is 300K constant temperature.
|
|
|
|
|
|
|
June 3, 2011, 13:30
|
|
#9 |
|
New Member
Almaz
Join Date: Dec 2009
Location: Russia
Posts: 7
Rep Power: 5 |
hanks a lot. try. and then accomplish your goal.
|
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
