CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Macro Problem!!! (http://www.cfd-online.com/Forums/star-ccm/90670-macro-problem.html)

eRzBeNgEl July 18, 2011 08:51

Macro Problem!!!
 
Hey guys

I am going to run a macro and always follogin message appears:

Code:

Annotation: Macro run-time error: ClientServerObjectManager: star.common.BoundaryManager_2
  ObjectName: Perio_a1
  error: Named object does not exist in manager
Annotation: Named object does not exist in manager
Annotation: Named object does not exist in manager
error: Macro run-time error: ClientServerObjectManager: star.common.BoundaryManager_2

All my boundarys are named like the input file for the macro. There is no difference in capital letters, etc..!

What is the problem?

Thanks

chili023 July 27, 2011 05:30

Post the Macro
 
post the Macro please!

abdul099 August 7, 2011 15:20

The solution is quite simple: There is NO boundary named "Perio_a1" in the boundary manager where the macro expects a boundary with this name.

I just noticed, your boundary manager is named "BoundaryManager_2", so I suspect there will be more than one boundary manager. Are you sure, your macro is looking in the right boundary manager for the boundary?
For example, when "BoundaryManager_1" contains a boundary named "Perio_a1", all looks fine for you when checking the sim-file. But it doesn't mean, "BoundaryManager_2" (which we assume NOT to contain that boundary) can find it, because it's a different manager - and that causes an error message.

eRzBeNgEl August 9, 2011 02:04

Quote:

I just noticed, your boundary manager is named "BoundaryManager_2", so I suspect there will be more than one boundary manager. Are you sure, your macro is looking in the right boundary manager for the boundary?
Thanks for help, that was the problem....


All times are GMT -4. The time now is 07:22.