CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   How can i create this :-) (http://www.cfd-online.com/Forums/star-ccm/91484-how-can-i-create.html)

eRzBeNgEl August 12, 2011 05:00

How can i create this :-)
 
1 Attachment(s)
Hi

How can i create the streamlines just on the blade like on the picture in the attachement? They should also be just filled and show the velocity in radial&tangential direction

ping August 14, 2011 22:30

not sure you can do that plot exactly at present - the lines can be added as a derived part of type Constrained Streamline, but adding the little arrows is not available that I can see. However to show local flow direction you could create a new derived part of type Cell Surface, use the constrained streamline as the input part, then add this to a vector displayer in the scene, then fiddle with vector colour, length, on ratio etc to get something useful.


All times are GMT -4. The time now is 05:58.