CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

How can i create this :-)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 12, 2011, 06:00
Default How can i create this :-)
  #1
Senior Member
 
Join Date: Dec 2010
Posts: 135
Rep Power: 15
eRzBeNgEl is on a distinguished road
Hi

How can i create the streamlines just on the blade like on the picture in the attachement? They should also be just filled and show the velocity in radial&tangential direction
Attached Images
File Type: jpg Bild1.jpg (42.8 KB, 111 views)
eRzBeNgEl is offline   Reply With Quote

Old   August 14, 2011, 23:30
Default
  #2
Senior Member
 
Ping
Join Date: Mar 2009
Posts: 556
Rep Power: 20
ping is on a distinguished road
not sure you can do that plot exactly at present - the lines can be added as a derived part of type Constrained Streamline, but adding the little arrows is not available that I can see. However to show local flow direction you could create a new derived part of type Cell Surface, use the constrained streamline as the input part, then add this to a vector displayer in the scene, then fiddle with vector colour, length, on ratio etc to get something useful.
ping is offline   Reply With Quote

Old   June 20, 2021, 02:41
Default
  #3
New Member
 
Shamik
Join Date: Jun 2021
Posts: 2
Rep Power: 0
Shamik96 is on a distinguished road
hello Ping..

Thank you for you input regarding the plotting of the constrained streamlines.
I wanted to plot something similar over my blade. So I chose the balde surface as the input part but I am not able to chose the part seed. Can you please tell me what should I choose in the part seed? Because my streamlines are looking very odd.. Please refer the attached figure
Attached Images
File Type: jpg constrained streamlines.jpg (30.0 KB, 46 views)
Shamik96 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing a Sphere Ajay FLUENT 10 September 3, 2016 15:18
[blockMesh] Include list of points Hikachu OpenFOAM Meshing & Mesh Conversion 0 June 20, 2011 10:03
Actuator disk model audrich FLUENT 0 September 21, 2009 08:06
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 02:07
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 19:47.