CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CCM+

Loading Templates / Presets ???

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 27, 2011, 13:13
Default Loading Templates / Presets ???
  #1
New Member
 
Niall
Join Date: Jun 2010
Posts: 9
Rep Power: 7
Yogibear is on a distinguished road
Ive worked my way through almost all ofthe tutorials in star ccm+ and I was wondering if their was a way of saving the setup for use with different geometry.

I dont think star ccm allows this but thought id ask simply because I want to repeat runs with different hull configerations but find it very tedious going through all of the settings over and over again for each configeration.

Im putting different hulls into head waves and it ends up taking me at least an hour to put all the settings in and obviosly the more times I do it the more likely I am to make a mistake.

Thanks
Yogibear is offline   Reply With Quote

Old   September 27, 2011, 15:52
Default
  #2
Super Moderator
 
Ryne Whitehill
Join Date: Aug 2009
Posts: 313
Rep Power: 9
rwryne is on a distinguished road
Quote:
Originally Posted by Yogibear View Post
Ive worked my way through almost all ofthe tutorials in star ccm+ and I was wondering if their was a way of saving the setup for use with different geometry.

I dont think star ccm allows this but thought id ask simply because I want to repeat runs with different hull configerations but find it very tedious going through all of the settings over and over again for each configeration.

Im putting different hulls into head waves and it ends up taking me at least an hour to put all the settings in and obviosly the more times I do it the more likely I am to make a mistake.

Thanks
I usually set up my problem once on a file and run it, make sure all is well. Then when I am ready for the next design change, clear the solution (sometimes, othertimes you can keep it for a starting point), replace the geometry, save under a new name, and resubmit. Not a template per se, but acts as one.
rwryne is offline   Reply With Quote

Old   September 28, 2011, 14:50
Default
  #3
New Member
 
Jean-François Corbett
Join Date: Aug 2011
Posts: 8
Rep Power: 5
jfcorbett is on a distinguished road
You can record a macro while you're applying the settings, and play the macro when you start on a new simulation.
jfcorbett is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux Batch - Star-CCM+ .. running Sims in batchmode eRzBeNgEl STAR-CCM+ 3 August 29, 2011 04:43
problem loading UDF library in parallel cluster Veera Gutti FLUENT 7 July 3, 2011 09:15
60 million cell case loading in openFoam nikhilesh OpenFOAM Running, Solving & CFD 0 June 3, 2009 08:36
distortion of mesh while loading the report fkonias CFX 2 November 9, 2007 08:40
error while loading shared libraries: libXm.so.3 Emiliano FLUENT 1 September 5, 2007 20:03


All times are GMT -4. The time now is 18:30.