CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > Siemens > STAR-CCM+

Erosion Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 22, 2011, 05:45
Default Erosion Problem
  #1
New Member
 
Kin Poh
Join Date: Nov 2011
Location: PJ Malaysia
Posts: 4
Rep Power: 14
ahbao86 is on a distinguished road
Hello all,

I am new in CFD STAR-CCM.
I would like to do some erosion simulation in STAR-CCM.
I did the tutorial to get erosion rate.
But after I import my model and model, i couldn't get my erosion rate as in tutorial. there might be several problems i discovered is happened but i cannot solve.

ahbao86 is offline   Reply With Quote

Old   November 22, 2011, 05:47
Default
  #2
New Member
 
Kin Poh
Join Date: Nov 2011
Location: PJ Malaysia
Posts: 4
Rep Power: 14
ahbao86 is on a distinguished road
1. It has reversed flow on face outlet.
2. It has negative pressure at the corner.
3. Do I set correctly for the boundary condition?? because the required area is wall.
4. I couldn't get erosion rate although i get the pressure distribution with reserved flow.

Anyone could help me solving this problem, I will very very appreciate your helping.

Thanks a lot~~

Regards,
Ah Bao
ahbao86 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 10 February 7, 2024 22:50
Pipe bend erosion problem John Yang FLUENT 2 December 12, 2007 05:06
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 20:13
about erosion problem caused by solid particles hannah CFX 4 August 20, 2003 05:42
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 15:52


All times are GMT -4. The time now is 11:52.