Specifying plane to transform to 2D

mdnss69 · January 24, 2012, 09:22

I'm attempting to convert a 3D mesh to a 2D mesh. However the program only seems to want to cut the mesh down a plane that is unspecified and a plane I don't want it to be cut down. Is there anyway one can specify the plane to be cut? I've created planes, I've split the regions... thoughts?

willimanili · January 24, 2012, 09:49

Your 2D mesh will be extracted from the xy-plane (z=0) of the laboratory coordinate system. So you have to position your 3D mesh in the way that the xy-plane can be used to extract your 2D mesh. Ensure that only boundaries are at the xy-plane. It is not possible to cut volume cells by the conversion process.

January 24, 2012, 09:22	Specifying plane to transform to 2D	#1
mdnss69 New Member Mark Join Date: Oct 2011 Posts: 2 Rep Power: 0	I'm attempting to convert a 3D mesh to a 2D mesh. However the program only seems to want to cut the mesh down a plane that is unspecified and a plane I don't want it to be cut down. Is there anyway one can specify the plane to be cut? I've created planes, I've split the regions... thoughts?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using a Plane id in Fluent UDF	cdf_user	Fluent UDF and Scheme Programming	13	October 17, 2023 00:06
[Gmsh] Problem with Gmsh	nishant_hull	OpenFOAM Meshing & Mesh Conversion	23	August 5, 2015 02:09
Meshing a Mixing Plane using ICEM	Will Anderson	FLUENT	0	November 6, 2010 17:08
[Gmsh] boundaries with gmshToFoam‏	ouafa	OpenFOAM Meshing & Mesh Conversion	7	May 21, 2010 12:43
Relief Plots in CFX	Michael	CFX	15	June 30, 2006 08:01

January 24, 2012, 09:49		#2
willimanili Member Join Date: Feb 2011 Location: DE-PB Posts: 56 Rep Power: 15	Your 2D mesh will be extracted from the xy-plane (z=0) of the laboratory coordinate system. So you have to position your 3D mesh in the way that the xy-plane can be used to extract your 2D mesh. Ensure that only boundaries are at the xy-plane. It is not possible to cut volume cells by the conversion process.