Starting out

liverpool_student · January 18, 2012, 06:45

Just wondering what things should you remember when starting out on fluid flows?

I have read about y+ values and such and would love if someone could link me/point me to appropriate content (book/website)

or even post a few good pointer here

Thanks!

willimanili · January 18, 2012, 09:20

http://www.cfd-online.com/Wiki/Dimen...e_%28y_plus%29

Look for Using Wall Treatment Models in the star-ccm+ user guide.

sanjay · January 19, 2012, 06:02

there are couple of videos to assist you on YouTube. Also the tutorials on CCM+ will help you a lot.

regards
www.aerosapien.blogspot.com

Josh · January 24, 2012, 20:58

One excellent book I purchased is Computational Methods for Fluid Dynamics by Ferziger and Peric. Reading a book like this will save you so much time in the long run.

January 18, 2012, 06:45	Starting out	#1
liverpool_student New Member Stuart Conquest Join Date: Oct 2011 Posts: 2 Rep Power: 0	Just wondering what things should you remember when starting out on fluid flows? I have read about y+ values and such and would love if someone could link me/point me to appropriate content (book/website) or even post a few good pointer here Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Error Message "Stopped in Routine SIG_HANDLER" appears starting CFX-Solver	Leuchte	CFX	4	September 20, 2010 08:12
FoamX starting on Fedora 8 x86_64 and i386 Error nsd ORBIIOPAddr %24myIOP ior %24FOAMX_CONFIGnsref %2360 devnull	rationaalinen	OpenFOAM Pre-Processing	6	December 2, 2007 11:40
FoamX not starting Javarelated error	agrahn	OpenFOAM Pre-Processing	5	October 20, 2007 05:33
starting load step number!!!???	KtoTo	CD-adapco	0	April 4, 2007 05:44
problem with starting ansyslmd	Mike	CFX	0	March 2, 2005 07:59

January 18, 2012, 09:20		#2
willimanili Member Join Date: Feb 2011 Location: DE-PB Posts: 56 Rep Power: 3	http://www.cfd-online.com/Wiki/Dimen...e_%28y_plus%29 Look for Using Wall Treatment Models in the star-ccm+ user guide.

January 19, 2012, 06:02		#3
sanjay Member aerosapien Join Date: Sep 2010 Posts: 49 Rep Power: 3	there are couple of videos to assist you on YouTube. Also the tutorials on CCM+ will help you a lot. regards www.aerosapien.blogspot.com

January 24, 2012, 20:58		#4
Josh Senior Member Joshua Counsil Join Date: Jul 2009 Location: Seattle, Washington Posts: 359 Rep Power: 5	One excellent book I purchased is Computational Methods for Fluid Dynamics by Ferziger and Peric. Reading a book like this will save you so much time in the long run.