CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   How to model transient intake manifold flow (http://www.cfd-online.com/Forums/star-ccm/97948-how-model-transient-intake-manifold-flow.html)

FlowMe February 28, 2012 21:36

How to model transient intake manifold flow
 
Hi,

I did searching all over and could never come up with anything, and I don't see any tutorials that cover it.

How do you simulate intake valves opening and closing in an intake manifold (thus, on a 3 cylinder, 2 outlets being blocked off at one time and only 1 being open) Do you have to set it up in something like Pro/E Mechanism first and then bring it in?

You should be able set it up directly in star right?

Thanks in advance.

Pauli February 29, 2012 11:15

For moving valve you should look at es-ice. It is a cd-adapco tool specifically designed to model internal combustion engines.

abdul099 March 4, 2012 16:30

You should also be able to run it with mesh morphing and remeshing / mesh replacement.


All times are GMT -4. The time now is 21:17.