CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CCM+ (http://www.cfd-online.com/Forums/star-ccm/)
-   -   Mass Transport Simulation (http://www.cfd-online.com/Forums/star-ccm/98220-mass-transport-simulation.html)

bioflow March 6, 2012 07:27

Mass Transport Simulation
 
Just wondering has anyone used Star CCM+ for mass transport simulations?

I'm hoping to simulate the build-up in concentration of dye particles within an aneurysm shape, but have started with just a straight pipe to try work out the best method for the simulation first. I've been using multi-phase flow with two Eulerian phases - liquid (water) and particle (dye)...however, the post-processing is proving difficult. Has anyone looked at concentrations, or something similar to this? Any general advice?

(I'm a newbie to CFD so apologies if the description is vague)

siara817 March 6, 2012 09:12

Have you tried the field function Mass flow rate of particle?
Other think is that I am wondering, why do not you use the Lagrangian multiphase ?

siara817 March 7, 2012 06:42

If you want to use the Eulerian multiphase, you can generate a Scalar Scene and then for the field function, go to mass flow rate. you will have two choices, water or particle. select that one you like.
good luck


All times are GMT -4. The time now is 00:46.