|
[Sponsors] |
November 7, 2011, 02:20 |
About the fiel"es-ice.pos"
|
#1 |
Member
zheng jianjun
Join Date: Jan 2010
Posts: 46
Rep Power: 16 |
Hi everyone,
I use es-ice to generate the moving mesh, and use star-contorls to set the parameters. I want to know why sometimes the program can not generate the file "es-ice.pos" during calculation. When I do the example of the es-ice tutorial, it works okay, and it can output the "es-ice.pos"file. But when I do my work, it cannot output this file. I use ECFM-3Z model, and select methan(CH4) for the fuel... Is it resulting from the change of fuel? please help me... |
|
May 23, 2012, 02:36 |
es-ice.pos
|
#2 |
New Member
entcrmlc
Join Date: May 2012
Posts: 3
Rep Power: 13 |
yes,i also meet the same problem and do not know how to solve it. Have you found the method to solve this problem??
|
|
May 24, 2012, 01:41 |
|
#3 |
Member
zheng jianjun
Join Date: Jan 2010
Posts: 46
Rep Power: 16 |
Locate the "Analysis Output"panel /"Post page/"Additional output Data" group, and make sure that the "User Subroutine" item is actived.
I think, ice uses "posdat.f" subroutine to output the postprocessing data and write them in "es-ice.pos" file. Hope it works. ---------------------------------------------------------------------- |
|
May 24, 2012, 05:28 |
Tannk you for your help
|
#4 |
New Member
entcrmlc
Join Date: May 2012
Posts: 3
Rep Power: 13 |
Yes,it can solve the problem.Thank you very much !!skylent
You will be thanked in My thesis thank. And i wish to Exchange the learning experience with you more.Good friend. |
|
|
|