CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > STAR-CD

Star Setup Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 6, 2013, 12:01
Default Star Setup Problem
  #1
New Member
 
Edward Hopkins
Join Date: Dec 2012
Posts: 10
Rep Power: 4
Ed_89 is on a distinguished road
I currently have a simulation at the stage where the 2D and 3D templates are trimmed and meshed, I then try and start the Star setup as in the tutorials and I keep getting this error:

There is no space for a collapsing layer above cell 1107. One possible
source of this problem is that the cells at the cylinder wall have been
trimmed, because the vertices of the cylinder wall shells are not at the
cylinder radius.

I have tried increasing the cell layers above and below but it does not help.

Any ideas??

Thanks

Ed
Ed_89 is offline   Reply With Quote

Old   March 12, 2013, 09:57
Default
  #2
New Member
 
Edward Hopkins
Join Date: Dec 2012
Posts: 10
Rep Power: 4
Ed_89 is on a distinguished road
I solved the problem by using the 2D automatically generated template by ES-ICE. This seemed to run fine.
Ed_89 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
setup vof test problem Fang Jin FLUENT 1 June 14, 2005 08:27
Dynamic Mesh setup problem Jim FLUENT 1 June 8, 2005 09:26
Problem Setup: Bi-Axial Rotation Possible? Harmeet CFX 6 February 11, 2005 16:27
CFD problem setup for flow through porous media Paresh Jain CFX 5 June 30, 2003 03:50
CFD problem Setup for Packed Bed Column Vijay CFX 0 June 20, 2003 08:23


All times are GMT -4. The time now is 14:35.