CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CD (http://www.cfd-online.com/Forums/star-cd/)
-   -   star cd v4.02 restart file (http://www.cfd-online.com/Forums/star-cd/63338-star-cd-v4-02-restart-file.html)

hwangkl April 6, 2009 04:05

star cd v4.02 restart file
 
in star cd v4.02, the restart files like ***.cmm_010 will be generaated during running the code.

if i interrupt the running job, no final result file ***.cmm generaated.

how can i restart with the restart file ***.cmm_010?

thanks

A_Lyaskin April 6, 2009 11:08

Just try to remove the "_<number>" part from the latest file

hwangkl April 7, 2009 03:42

this method can not work

cloudbuaa April 7, 2009 11:23

Set in the "Restart" panel, point the "Restart File" to *.ccm_10, then remember to re-write new geometry and problem files.
BTW: Before you're re-writing your new geometry file, you'd better delete the *.ccm file contains both geometry and post data which generated after your last run. Because the new geometry file *.ccm should overwrite the last one.

hwangkl April 7, 2009 20:19

Quote:

Originally Posted by cloudbuaa (Post 212229)
Set in the "Restart" panel, point the "Restart File" to *.ccm_10, then remember to re-write new geometry and problem files.
BTW: Before you're re-writing your new geometry file, you'd better delete the *.ccm file contains both geometry and post data which generated after your last run. Because the new geometry file *.ccm should overwrite the last one.


thanks, it works


All times are GMT -4. The time now is 18:02.