CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   STAR-CD (http://www.cfd-online.com/Forums/star-cd/)
-   -   STAR-CD Tutorial (http://www.cfd-online.com/Forums/star-cd/64197-star-cd-tutorial.html)

shekhar aryal May 2, 2009 07:50

STAR-CD Tutorial
 
Continue to previous one second step i transfer the (.mdl) file to the new ccm tutorial 9.1 which has been asked to do so.
On pre-processing i did what it say but
in Select File>Read input cooded file... and i select PPDF_ad.mdl(which name has been changed here from Combustor of meshing tutorial 1.2 to PPDF_ad of ccm tutorial 9.1 to recognised by the tutorial. then i select PPDF_ad.inp from the opening file option from the (Read input coded file...)but here it will show the error message.(I don't understand why it happen so?).i already transfer the .cel,.ver,.inp,.bnd file also to the 9.1 tutorial and change the name as PPDF_ad to all.
Then i did the following Material Properties and Combustion model.
At last after CEA application when i click Apply it will say in the box (cannot execute the program(cea).and when i apply graph also it will say in the error box some error message and some code in (star lunch ).I don't understand how do i solve this if you have idea please write me.
http://www.cfd-online.com/Forums/ima...c/progress.gif

wddufo September 9, 2009 08:17

i have the same error as yours. Did you sovle it?

kim100 December 7, 2009 08:23

Facing the same problem as you did,and I tried many times ,but that did not work as well! He(she) who talent come to find it out! thanks anyway!

skylent February 15, 2010 23:52

Maybe it is related to the installation of absoft fortran. I think CEA is fortran program it self. Because I use the use defined subroutine it always failed.

hwangkl March 22, 2010 04:25

i also have the same error as yours.


All times are GMT -4. The time now is 05:29.