How to import mesh from icem cfd to star cd

jopawipr · May 26, 2009, 04:48

Hey!
I made my mesh in icem cfd 12.0.1.
Now, i wanna import this mesh to star cd 4.08.
I never did that before and i'm pretty new in cfd programms.

So maybe somebody can help me!
Thank you very much and sorry for the bad english...
Johannes

nottoforget · December 4, 2009, 13:40

I have the same problem!
I tried using Icem 11.0 and Icem 12.0
I enter in output>selectsolver-outputsolver - star-cd 3.24 or star or star-4; commonstructuralsolver- ansys]
Then I click write output. In star-cd 4.08 I choose Import grid - ICEM-find file star.inp - apply.
But nothing happens!!
Please give me an advice.

Zeppo · September 9, 2012, 06:04

Quote:

Originally Posted by nottoforget

I have the same problem!
I tried using Icem 11.0 and Icem 12.0
I enter in output>selectsolver-outputsolver - star-cd 3.24 or star or star-4; commonstructuralsolver- ansys]
Then I click write output. In star-cd 4.08 I choose Import grid - ICEM-find file star.inp - apply.
But nothing happens!!
Please give me an advice.

With Star-CD being running, open GUIDE-dialog and go right to Import Mesh tab. Choose Srar-CD as a mesh format to import and provide your .cel, .vtr files you've had from ICEM.

jwillie2000 · October 1, 2012, 07:30

Hello Johannes,

I have a similar problem but it is the other way around for me. That is i have a star-ccm+ or star-cd mesh in the following formats:

.ccm -CD ADAPCO CCM file
.case-Ensight Gold file
.fvuns-Fieldview file
.plt-Tecplot 360 file

Additionally, the pro-STAR based .cel/.vrt format is provided for the report of boundary shells from the current volume mesh region.

Have you tried importing a mesh you created in star-ccm+ into fluent before? Your thoughts would be appreciated.

Thanks!
Jimmy

Zeppo · November 9, 2012, 15:18

Quote:

Originally Posted by jwillie2000

Have you tried importing a mesh you created in star-ccm+ into fluent before? Your thoughts would be appreciated.

I'm pretty sure ICEM can do that.

May 26, 2009, 04:48	How to import mesh from icem cfd to star cd	#1
jopawipr New Member Johannes Join Date: May 2009 Posts: 16 Rep Power: 5	Hey! I made my mesh in icem cfd 12.0.1. Now, i wanna import this mesh to star cd 4.08. I never did that before and i'm pretty new in cfd programms. So maybe somebody can help me! Thank you very much and sorry for the bad english... Johannes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ICEM CFD to CFX geometry and mesh	Luca	CFX	6	February 4, 2010 16:31
CFX mesh import from ICEM (Windows)	Andrew	CFX	7	July 6, 2006 11:39
ICEM CFD surface mesh	Francesco	CFX	1	May 31, 2006 11:09
Trimmed cell and embedded refinement mesh conversion issues	michele	OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ...	2	July 15, 2005 04:15
Gambit problems	Althea	FLUENT	21	February 6, 2001 07:05

December 4, 2009, 13:40		#2
nottoforget New Member girl Join Date: Jul 2009 Location: Russia Posts: 11 Rep Power: 5	I have the same problem! I tried using Icem 11.0 and Icem 12.0 I enter in output>selectsolver-outputsolver - star-cd 3.24 or star or star-4; commonstructuralsolver- ansys] Then I click write output. In star-cd 4.08 I choose Import grid - ICEM-find file star.inp - apply. But nothing happens!! Please give me an advice.

October 1, 2012, 07:30		#4
jwillie2000 Member James Willie Join Date: Mar 2009 Posts: 63 Rep Power: 6	Hello Johannes, I have a similar problem but it is the other way around for me. That is i have a star-ccm+ or star-cd mesh in the following formats: .ccm -CD ADAPCO CCM file .case-Ensight Gold file .fvuns-Fieldview file .plt-Tecplot 360 file Additionally, the pro-STAR based .cel/.vrt format is provided for the report of boundary shells from the current volume mesh region. Have you tried importing a mesh you created in star-ccm+ into fluent before? Your thoughts would be appreciated. Thanks! Jimmy