Star-CD 4 and importing mesh

hamoudi · May 18, 2009, 12:07

please it is very Urgent

I build my 2D geometry in ICEM-CFD and after this I export the 2D Mesh of this Geometry to solve it in Star-CD 4 but i receive a message that the Star-cd 4 do not accept the 2D mesh importing

i try to use the solver of Star-CD 3.1.0 et Star CD 3.0.5
it was good but there is an other problem that the Star-CD 4 can not read the old boundaries then i have 0 boundaries then i can not define my boundaries in Star-CD4

please if any one have a solution please i am in a waiting

thanck you

A_Lyaskin · May 20, 2009, 02:46

It looks like you have some old version of ICEM-CFD - version 11 has STAR-CD 4 in the solver list.

If you can't upgrade for newer version try searching forum archives - there was a topic about .cel and .vrt file conversion (that's how ICEM exports STAR-CD mesh) between v.3.x and v.4.x.

hamoudi · May 26, 2009, 05:42

Good Morning Everybody,

I have 2D simulation, i made the 2D Hexa Mesh in ICEM-CFD 11 to solve it
in Star-CD 4.06, but when i try to Export this mesh by selecting the solver
Star-CD 4.06 I receive this error Message ***
************************************************** **
Running ANSYS-ICEM CFD 11 Star- CD 4 interface vers11.0.1
Error exit This Interface only supports 3D Mesh
Error in Translation
************************************************** **

Please if someone can help me, I am in a waiting for your response
I have lost a lot of time

Thanck you very Much

hamoudi · May 26, 2009, 05:43

Good Morning Everybody,

I have 2D simulation, i made the 2D Hexa Mesh in ICEM-CFD 11 to solve it
in Star-CD 4.06, but when i try to Export this mesh by selecting the solver
Star-CD 4.06 I receive this error Message ***
************************************************** **
Running ANSYS-ICEM CFD 11 Star- CD 4 interface vers11.0.1
Error exit This Interface only supports 3D Mesh
Error in Translation
************************************************** **

Please if someone can help me, I am in a waiting for your response
I have lost a lot of time

Thanck you very Much

A_Lyaskin · May 26, 2009, 06:04

Well, all the information is in the error message - you can't export 2D mesh from ICEM to STAR-CD, only 3D. In ICEM you can extrude one layer of 3D mesh from your 2D mesh (or somehow else convert it from 2D to 3D) - then you'll be able to export it.

gmg · May 28, 2009, 09:51

Hi friends,
I would like to model k-e model. I drew geometry. so how can I mesh it properly. pls help me with instruction.

I am new user of star cd.

May 18, 2009, 12:07	Star-CD 4 and importing mesh	#1
hamoudi Member Hamoudi djamel Join Date: Apr 2009 Posts: 50 Rep Power: 17	please it is very Urgent I build my 2D geometry in ICEM-CFD and after this I export the 2D Mesh of this Geometry to solve it in Star-CD 4 but i receive a message that the Star-cd 4 do not accept the 2D mesh importing i try to use the solver of Star-CD 3.1.0 et Star CD 3.0.5 it was good but there is an other problem that the Star-CD 4 can not read the old boundaries then i have 0 boundaries then i can not define my boundaries in Star-CD4 please if any one have a solution please i am in a waiting thanck you

May 26, 2009, 05:42	Export Mesh from ICEM CFD 11 to Star-CD 4.06	#3
hamoudi Member Hamoudi djamel Join Date: Apr 2009 Posts: 50 Rep Power: 17	Good Morning Everybody, I have 2D simulation, i made the 2D Hexa Mesh in ICEM-CFD 11 to solve it in Star-CD 4.06, but when i try to Export this mesh by selecting the solver Star-CD 4.06 I receive this error Message * ********************************************** Running ANSYS-ICEM CFD 11 Star- CD 4 interface vers11.0.1 Error exit This Interface only supports 3D Mesh Error in Translation ************************************************ Please if someone can help me, I am in a waiting for your response I have lost a lot of time Thanck you very Much

May 26, 2009, 05:43	Export Mesh from ICEM CFD 11 to Star-CD 4.06	#4
hamoudi Member Hamoudi djamel Join Date: Apr 2009 Posts: 50 Rep Power: 17	Good Morning Everybody, I have 2D simulation, i made the 2D Hexa Mesh in ICEM-CFD 11 to solve it in Star-CD 4.06, but when i try to Export this mesh by selecting the solver Star-CD 4.06 I receive this error Message * ********************************************** Running ANSYS-ICEM CFD 11 Star- CD 4 interface vers11.0.1 Error exit This Interface only supports 3D Mesh Error in Translation ************************************************ Please if someone can help me, I am in a waiting for your response I have lost a lot of time Thanck you very Much

May 28, 2009, 09:51	k-e model	#6
gmg New Member Join Date: May 2009 Posts: 3 Rep Power: 16	Hi friends, I would like to model k-e model. I drew geometry. so how can I mesh it properly. pls help me with instruction. I am new user of star cd.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Error when importing cgns mesh created with numeca	Pe2	CFX	1	May 14, 2009 18:30
Importing a mesh from ICEM	Waseem Siddique	Siemens	14	February 9, 2009 05:05
Importing mesh problem	ParodDav	CFX	1	May 14, 2007 18:15
Problem in importing the Mesh	fred	Siemens	4	May 13, 2005 12:36
Error on importing mesh into Pre	Louwrens	CFX	0	October 7, 2003 11:55

May 20, 2009, 02:46		#2
A_Lyaskin Member Anton Lyaskin Join Date: Mar 2009 Location: Samara, Russia Posts: 66 Rep Power: 17	It looks like you have some old version of ICEM-CFD - version 11 has STAR-CD 4 in the solver list. If you can't upgrade for newer version try searching forum archives - there was a topic about .cel and .vrt file conversion (that's how ICEM exports STAR-CD mesh) between v.3.x and v.4.x.

May 26, 2009, 06:04		#5
A_Lyaskin Member Anton Lyaskin Join Date: Mar 2009 Location: Samara, Russia Posts: 66 Rep Power: 17	Well, all the information is in the error message - you can't export 2D mesh from ICEM to STAR-CD, only 3D. In ICEM you can extrude one layer of 3D mesh from your 2D mesh (or somehow else convert it from 2D to 3D) - then you'll be able to export it.