Problem in Post-Processing using Open-GL

cfd_staruser · July 7, 2009, 12:48

Hi,

I am star-cd V3.26 user.

Star-cd editor exits on logging in Open-GL mode for Post-Processing.

Currently i am using Xvision as Graphical interface.

Plese let me know how to fix this error.

Thanks in Advance,

cfd_staruser

Pauli · July 7, 2009, 15:47

Try starting prostar with the mesa option (prostar -mesa) rather than the open-gl option (prostar -gl).

cfd_staruser · July 8, 2009, 13:34

Hi Pauli,

Thanks for the response provided.

I tried the option, but it is not giving the same display as in -gl mode.

Just for your information, i am working in Windows Operating System.

regards
cfd_staruser

TMG · July 15, 2009, 13:24

Try installing the X client and tools from Cygwin instead of Xvision. We've had better luck in some cases and its free.

July 7, 2009, 12:48	Problem in Post-Processing using Open-GL	#1
cfd_staruser New Member Join Date: Jul 2009 Posts: 4 Rep Power: 2	Hi, I am star-cd V3.26 user. Star-cd editor exits on logging in Open-GL mode for Post-Processing. Currently i am using Xvision as Graphical interface. Plese let me know how to fix this error. Thanks in Advance, cfd_staruser

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
post processing problem	Charles	FLUENT	2	June 2, 2008 04:12
post processing and colours	george	CD-adapco	2	May 30, 2007 08:01
Post Processing Partial Result files	Sans	CFX	5	September 15, 2006 20:52
Looking for a open FEM code to solve a FSI problem	Esto	Main CFD Forum	3	June 15, 2006 12:02
Automatic post processing of Transient simulation	Aziz	CFX	2	June 24, 2005 15:37

July 7, 2009, 15:47		#2
Pauli Member Pauli Join Date: Mar 2009 Posts: 46 Rep Power: 2	Try starting prostar with the mesa option (prostar -mesa) rather than the open-gl option (prostar -gl).

July 8, 2009, 13:34		#3
cfd_staruser New Member Join Date: Jul 2009 Posts: 4 Rep Power: 2	Hi Pauli, Thanks for the response provided. I tried the option, but it is not giving the same display as in -gl mode. Just for your information, i am working in Windows Operating System. regards cfd_staruser

July 15, 2009, 13:24		#4
TMG New Member Join Date: Mar 2009 Posts: 14 Rep Power: 2	Try installing the X client and tools from Cygwin instead of Xvision. We've had better luck in some cases and its free.