|January 19, 2010, 05:25||
How:Setting for High pressure gas
Join Date: Mar 2009
Posts: 4Rep Power: 8
Dear all, I am simulating a case with conditions shown as following:
5Bar C3H8 gas is injected into 5bar N2 gas,which is background gas of model.
1. modify physical properties for both gases, density for example.
2. in panel of fluid initialization for N2, pressure value which is relative is changed into (5bar-1bar)=400000pascal.
3. Using inlet boundary and scalar boundary, to define scalar C3H8=100% for inlet.Here are questions: how to define pressure value for injecting gas?If do not specify, what is defined for it?
With this kind of cases, whether to use buoyancy or not gives quite different results(vector, pressure).
Wish to get some answers.
Thanks in advance.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Fluent natural ventilation pressure boundary condition||pierresandre||FLUENT||24||November 8, 2011 15:32|
|Why gas pressure keep constant when being heated||Hao||Main CFD Forum||0||July 9, 2008 03:28|
|Pressure boundary condition and real gas||Pifou||FLUENT||0||July 19, 2005 11:42|
|Total pressure in real gas (compressible flow)||Bart Prast||Main CFD Forum||3||November 14, 2000 11:44|
|Hydrostatic pressure in 2-phase flow modeling (long)||DS & HB||Main CFD Forum||0||January 8, 2000 16:00|